S21000-00

NSC MILO-8120 - Voice Alarm Controller & Amplifier

▪ Color touch screen of 4,3”. It offers a fast and intuitive access to all the main functions of the system.

▪ Supervised emergency microphone. Integrated Push-to-talk (PPT) microphone of high quality and supervised (connection and capsule).

▪ Monitor Loudspeaker. The audio inputs in MILO or the audio routed toeach zone can be monitored in real time with this built-in speaker.

▪ Dual pre-record message player. With an internal memory of 4GB, MILO can store hundreds of mes-sages and play them manually or automatically.

2 different messages can be played at the same time in different zones.

▪ Internal Digital Audio Matrix. Digital Audio Matrix 40×1024, that allows a simultaneous and indepen-dent routing

of any of the audio inputs to any of the zones.

▪ 8 class-D amplifiers built-in 8 x 120W @ 100V allowing up to 8 independent zones with one piece of equipment.

▪ Back-up power supply connection. Connection with the EN 54-4 battery charger.

▪ Contact-closure interface with Fire Detection Panel. 12 supervised contact closure I/O and inputs per zone.

▪ 8 outputs for attenuators control 24V output signals for deactivating automatically up to 32 AT volume attenuators.

▪ Line monitoring and built-in back-up amplification MILO can detect open circuit or short-circuit in all its amplification lines and

optionally, it can use its 8th amplifier as back-up for the rest.

▪ ACSI bus interface It allows the connection of up to 8 remote devices in the ACSI bus, either MPS-8Z microphones or VA Panels VAP-1.

▪ 8 EOL device inputs Optionally, it is possible to connect EOL device inputs to detect any problem in the speakers line.

▪ 5 balanced analogue audio inputs Any of the audio inputs in MILO can be routed independently to each zone thanks to its internal digital audio matrix

(40×1024). Additionally, MILO can receive up to 32 more audio inputs.

▪ 14 GPIO for advanced integrations. Thanks to the advanced event generator included in the MILO Configurator software, it is possible to combine, with

logic operations, GPIO signals in order to perform any action in the system.

▪ 8 pre-amp audio outputs. 8 audio outputs that duplicate the audio signal that is present or routed to each amplifier/zone.

▪ RS-485 interface for advanced integrations MILO can easily send or receive RS-485 commands for cre-ating advanced integrations with other systems.

▪ RS-485 interface for Fire Detection Panels Specific RS-485 interface for advanced integrations with Fire Detection Panels.

▪ Triple Ethernet port. It allows the reception and sending of CobraNet® Digital Audio (up to 32 more audio inputs), a remote

control and supervision, integrations by the use of UDP commands and the redundant connection with MILO Extension units.

Datasheet